Engenius Senao 630mW 802.11bg ECB-3610S
ECB-3610S Summary
ECB-3610S Wireless High Power and High Gain Client Bridge/Access Point/ WDS
operates in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz,
11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's
the best way to add wireless capability to your existing wired network, or to
add bandwidth to your wireless installation. To protect your wireless
connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP
data encryption and also supports WPA. The MAC address filter lets you select
exactly which stations should have access to your network. With the Wireless
Multi-Client Bridge/Access Point/WDS, you'll experience the best wireless
connectivity available today.
ECB-3610S Features
600mW RF output power for greater range
Latest security with WEP, WPA/WPA2
802.11b/g wireless client bridge/Access Point
PoE capable for flexible deployment
Technical Specifications
Data Rates
1Mbps@ -95dBm
Humidity (non-condensing)
1, 2, 5.5, 6, 9, 11, 12, 18, 24,
Available Transmit Power
5%~95% Typical
36, 48, 54 Mbps
(Typical)
Package Contents
Standards
· 2.412~2.472G(IEEE802.11g)
One AP/ CB Device
IEEE802.11b/g, IEEE802.3,
27dBm @6 ~ 24Mbps
One TNC Dipole Antenna
IEEE802.3u, IEEE802.3af,
One Power Adapter
IEEE802.1f, IEEE802.1x
25dBm@36Mbps
24 dBm@48Mbps
One CAT5 UTP Cable
Compatibility
One Quick Start Guide
23dBm@54Mbps
IEEE 802.11g/ IEEE 802.11b
One CD-ROM with User's
· 2.412~2.472G(IEEE802.11b)
Manual
Power Requirements
28 dBm@1, 2, 5.5 and 11Mbps
Power Supply: 90 to 240 VDC RF Connector
± 10 (depends on different
TNC Type (Female Reverse)
countries)
Device: 12 V/ 1A
Networking
Status LEDs
Topology
LAN: Link, WLAN: Link,
Ad-Hoc, Infrastructure
Power: on/off
Operation Mode
Regulation Certifications
Point-to-Point/ Point-to-Multipoint
FCC Part 15 B & C,
Bridge/ AP/ Client Bridge/ WDS
CE: EN 300328, EN 301489
Interface
EN 60950
One 10/100Mbps RJ-45 LAN Port
RF Information
Security
Frequency Band
IEEE802.1x Authenticator /
802.11b/g: U.S., Europe and
RADIUS Client (EAP-
Japan product covering 2.4 to
MD5/TLS/TTLS) Support in AP
2.484 GHz, programmable for
Mode
different country regulations
IEEE802.1x Supplicant (EAP-
MD5/TLS/TTLS, PEAP) support
Media Access Protocol
in Client Bridge Mode
Carrier Sense Multiple Access
WPA /WPA2/ Pre Share KEY
with Collision Avoidance
(PSK) with TKIP/AES
(CSMA/CA)
MAC address filtering (AP only)
Modulation Technology
Hide SSID in beacons
VLAN Pass-through
Orthogonal Frequency
Division Multiplexing (OFDM)
IP Auto-configuration
DBPSK @ 1Mbps
DHCP client/server
DQPSK @2Mbps
Management
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
Configuration
QPSK @ 12 and 18 Mbps
Web-based configuration (HTTP)
16-QAM @ 24 and 36 Mbps
Telnet Configuration
64-QAM @ 48 and 54 Mbps
SNMP V1, V2c
Operating Channels
Firmware Upgrade
11 for North America
14 for Japan
Upgrade firmware via web-browser
13 for Europe
Environmental
Receive Sensitivity (Typical) Temperature Range
· 2.412~2.472G(IEEE802.11g)
Operating: 0°C to 45°C (32°F to
6Mbps@ -91dBm;
113°F)
54Mbps@ -74dBm
Storage: -40°Cto 70°C (-40°F to
· 2.412~2.472G(IEEE802.11b)
158°F)
11Mbps@ -90dBm