DISCONTINUED SEE THE NEW ECB350 HERE
ecb-3220 New and improved Hardware Version 3
2-3 day shipping starts at only $6.85
400mW 802.11bg AP / bridge with detachable rp-tnc antenna
Includes new slim design power cube.
CLICK HERE FOR RESELLER PRICED 10 PACK $69 PER UNIT
Now supports Universal Wireless Repeater allowing the 3220 to connect to any 802.11bg access point and repeat the signal.
Click here for more information on Universal Wireless Repeater
This high power 400mW indoor wireless system is the most flexible, integrated high power and high receive sensitivity solution on the market. High output power and high sensitivity can extend your range and coverage to reduce roaming between APs and provide a more stable wireless connection at a further distance than typical wireless setups.
NOTE: This device has adjustable power output and ships in the lowest setting high. To increase the power output to 400mW go to wireless advanced setting and change output power level to extreme.
Click here for review
Click here for pigtails
Click here for external antennas
FOR POE THE ECB-3220 REQUIRES A 48V INJECTOR
Click here for 48V power injector up to 328 feet
Click here for 48V modular power injector up to 328 feet
Click here for 6 port 48V active ethernet power switch
Click here for
pdf spec sheet
Support for multiple operational modes inclues multi-client bridge, bridge router, access point, or use it as a repeater through wireless distribution system (WDS) to support wireless access point and bridge modes simultaneously using 802.11b and 802.11g wireless standards upto 54 MBps.
Security features allow you to encrypt all wireless transmissions using WEP/WPA2/WPA/802.1x for power security authentication. MAC address filtering and IP/MAC tunnelling allows you to control exactly which stations should have access to your network.
Features:
IEEE 802.11b/g compliant
High Speed Data rate upto 54 Mbps can support heavy data payloads such as MPEG video streaming.*
400mW high RF output power increasing throughput speeds, operating range, and signal strength to enhance stability of the wireless connection
SNMP Remote Configuration Management
NAT support (Client Bridge Mode) supports routing functions
Supports point-to-point, point-to-multipoint bridge to allow data transfer between two buildings or multiple buildings
WDS (Wireless Distribustion System) Support
WPA2/WPA/IEEE 802.1x support
Hide SSID, Mac address filtering in AP Mode
IP/MAC tunneling
IEEE 802.3af compliant Power over Ethernet (PoE)
Specification:
Upto 54 Mbps IEEE 802.11b/g compliant
12V/1A Power Supply, 90 to 240 VDC +/- 10% (depends on country)
Optional PoE (Power over Ethernet), IEEE 802.3af compliant
RF Transmit power (Typical):
Upto 26 dBm @1~24 Mbps
23 dBm @ 36 Mbps
21 dBm @ 48 Mbps
20 dBm @ 54 Mbps
Receive Sensitivity (Typical):
-94dBm @ 1Mbps -92dBm @ 2Mbps
-89dBm @ 5.5Mbps -86dBm @ 11Mbps
-92dBm @ 6Mbps -90dBm @ 9Mbps
-88dBm @ 12Mbps -86dBm @ 18Mbps
-83dBm @ 24Mbps -79dBm @ 36Mbps
•
Antenna connector: RP-TNC
Interface: One 10/100Mbps RJ-45 LAN Port
Status LEDs: LAN: Link, WLAN: Link, Power: on/off
Security:
IEEE 802.1x authenticator/RADIUS client (EAP-MD5/TLS/TTLS) support in AP mode
WPA2/WPA/Pre Share Key (PSK)/AES/TKIP
MAC address filtering (In AP Mode)
Hide SSID in beacons (In AP Mode)
IP Auto-configuration: DHCP Client/Server
Management Configuration: Web-based (HTTP), SNMP V1, V2C (MIBI, MIBII)
Firmware Upgrade: Web-based
Weight:
Operating Temp:
-10C to 50C / 14F to 122F for DC in
-10C to 40C / 14F to 104F for POE power supply
Package Includes:
1x ECB-3220 Client Bridge / AP Unit
1x 12V AC power adapater
1x CAT5 UTP Cable
1x 2 dBi RP-TNC Antenna
1x CD-ROM with User's Manual
Warranty and Support Information:
1 year manufacturers limited warranty
Technical Support is available from EnGenius Technologies at 888-735-7888
All Specifications subject to change without notice.
* Theoretical wireless signal rate based on IEEE standar of 802.11b,g chipset used. Actual throughput may vary. Network conditions and environmental factors lower actual throughput rate.

|