Untitled Document
This antenna is matched for best performance with the Engenius equipment and provides 2x the range of a stock 3dBi antenna.
Use for applications that require up to 1.5 miles in all directions.
Inlcudes pole mounting hardware. It has a standard N female connector to fit any of our pigtails.
Applications: Boat, RV, Truck, WiFi Client, WiFi repeater
This antenna covers 360 degrees in the horizontal plane and 15 degrees in the Verticle. It will cover in all directions well including loacations above and below.
Good for boats or mobile applications where rocking or uneaven mounting can cause a higher gain antenna to go out of range.
optional wall mount
Frequency
2400-2500 MHz
Gain
8.5 dBi
Polarization
Vertical
Vertical Beam Width
25°
Horizontal Beam Width
360°
Impedance
50 Ohm
Max. Input Power
50 Watts
VSWR
< 1.5:1 avg.
Weight
1.1 lbs. (0.5 kg)
Length
20 in. (0.5 m)
Radome Material
White Fiberglass
Mounting
2.0" diameter mast max.
Wind Survival
>150 MPH
Operating Temperature
-45° C to +80° C
Connector
Integral N-Type Female
(Bulkhead type)
Extend your range greatly in one direction with this screw on directional
antenna.
works with EUB9603H, ECB350, ECB300, (ECB600 2.4Ghz connectors), ENS202EXT to push the
signal in the direction you need it most.
Frequency 2400〜2500MHz
Gain (dBi) 6.5 dBi
Type PANEL
Polarization Vertical
Impedance 50Ω
Beam width deg. Horz.90° Vert.90°
VSWR ≦1.6
Cable Connector SMA MALE RP (Option)
Size L120XW12xH35.5 mm
Weight 39g
Works with Wi-Spy DBx and Wi-Spy 2.4x
Don’t let mystery devices stay a mystery. Take control of your wireless environment with our purpose-made Device Finder Directional Antenna and track down offending devices with quickness and surety. Designed in-house at MetaGeek, this antenna gives you greater ability to discover exactly which direction a 2.4 GHz transmission is coming from.
Take charge of your wireless environment.
Device Finder Directional Antenna will enable you actively seek out transmitters so you can know exactly what you’re dealing with.