2400 MHz - 2500 MHz, 12dBi Omnidirectional Fiberglass Antenna, N Female Connector, White includes mounting hardware
20 foot cat6 gigabit ethernet cable for indoor or outdoor use work with 10/100 and gigabit ethernet ports.
6.5dBi 2.4Ghz directional antenna SMA male RP
Extend your range greatly in one direction with this screw on directional
antenna.
works with EUB9603H, ECB350, ECB300, (ECB600 2.4Ghz connectors), ENS202EXT to push the
signal in the direction you need it most.
Frequency 2400〜2500MHz
Gain (dBi) 6.5 dBi
Type PANEL
Polarization Vertical
Impedance 50Ω
Beam width deg. Horz.90° Vert.90°
VSWR ≦1.6
Cable Connector SMA MALE RP (Option)
Size L120XW12xH35.5 mm
Weight 39g
SMA plug with 5' lead For use with the EUB9603H and other devices with a SMA connector. Doubles the range of the alfa AWUS036NHRv2/ EUB9603H / EUB-362 EXT not for use with mmcx cards like the 2511cd plus ext2 or Ubiquity SRC Also works with AWUS036NHRv2, ENS202EXT, EOC-3610S, EOC-8610S, EOC-3220, ESR-9710, EUB-9701 EXT2, EPI-3601S and ESR-1220 This antenna is matched for best performance with the EnGenius equipment and can handle the high power output. Features: High performance 7 dBi gain Compact size, 10.2 " High Magnetic base removeable antenna 5 foot coax lead
Untitled Document This antenna is matched for best performance with the Engenius equipment and provides 2x the range of a stock 3dBi antenna. Use for applications that require up to 1.5 miles in all directions. Inlcudes pole mounting hardware. It has a standard N female connector to fit any of our pigtails. Applications: Boat, RV, Truck, WiFi Client, WiFi repeater This antenna covers 360 degrees in the horizontal plane and 15 degrees in the Verticle. It will cover in all directions well including loacations above and below. Good for boats or mobile applications where rocking or uneaven mounting can cause a higher gain antenna to go out of range. optional wall mount Frequency 2400-2500 MHz Gain 8.5 dBi Polarization Vertical Vertical Beam Width 25° Horizontal Beam Width 360° Impedance 50 Ohm Max. Input Power 50 Watts VSWR < 1.5:1 avg. Weight 1.1 lbs. (0.5 kg) Length 20 in. (0.5 m) Radome Material White Fiberglass Mounting 2.0" diameter mast max. Wind Survival >150 MPH Operating Temperature -45° C to +80° C Connector Integral N-Type Female (Bulkhead type)
Use this bracket to mount a AP or antenna to a wall or pole allows for horizontal and vertical adjustment Includes wall mounting screws (4) and pole mounting clamps (2). for ENH200, ENH202 or ENH500 Use a 1.5" diameter 8" long piece of PVC (not included) dimensions 3"x3" on each clamp
mmcx to n male 2 feet Use this for our 2511CD-plus-ext2 card to connect to any of our external entennas. The coax and connectors used in these cables are high quality low loss Also works with other cards with mmcx connnectors like UBIQUITI SRC, Z-Com XI-325 and SMC2532W-B We do not stock longer pigtails because they should be as short as possible to reduce line loss.
pigtail n to n male 3 feet Works with ENH1750EXT, EWS860AP, EOR7550, EOA3630 and any of our N Female antennas. 3 foot long low loss cable
RP-SMA male to N-Male 2 ft This is the correct pigtail for the ECB350, eoc2611p, enh200 ext, eoc1650, eoc-5610, EUB9603H, EUB-362 EXT, EOC-3610S, EOC-8610S, EOC-3220, ESR-9710, EUB-9701 EXT2, EPI-3601S and ESR-1220 This pigtail is matched for best performance with the Engenius equipment. The coax and connectors used in these cables are high quality low loss We do not stock longer pigtails because they should be as short as possible to reduce line loss.
rp-tnc to n male 4 feetUse this to connect the ecb3500, ecb-3610S, ecb-8610S, ecb-3220 and 2611cb3 to any of our external antennas. This pigtail is matched for best performance with the Engenius equipment. The coax and connectors used in these cables are high quality low loss We do not stock longer pigtails because they should be as short as possible to reduce line loss.
U.FL pigtail for mini PCI cards including EMP-8602, EMP-9701,SR5 and SR2 Connector 1: U.FL Connector 2: TNC Female Bulkhead Cable type: 1.13mm Low Loss Overall length: 10 inches The outside of the RP-TNC connector is threaded with a male center pin
Spare Power Supply 12v 1A fits many Wi-Fi AP's and routers
Quick, screwless installation of AP. works with most Wi-Fi AP's including: Ruckus R710, R720, R510, R310 Engenius EWS360AP, EWS350AP, EWS330AP, Aerohive AP250, AP550 Meraki MR12, MR33, MR42, MR52 No zip ties or velcro, professional look and result. Reduces number of AP units required for room coverage Safe, secured use for unstable installations such as yachts. Brings access points closer to client devices, ensuring faster connections. Paintable cover allows matching decor, completely hides AP devices to please interior designers. Protects and hides access point and wires to prevent damage, theft, or unauthorized alteration. Service in minutes, easy to upgrade, modify, or replace installed AP. Lowers installation and material costs. Client satisfaction guaranteed.