Extend your range greatly in one direction with this screw on directional
antenna.
works with EUB9603H, ECB350, ECB300, (ECB600 2.4Ghz connectors), ENS202EXT to push the
signal in the direction you need it most.
Frequency 2400〜2500MHz
Gain (dBi) 6.5 dBi
Type PANEL
Polarization Vertical
Impedance 50Ω
Beam width deg. Horz.90° Vert.90°
VSWR ≦1.6
Cable Connector SMA MALE RP (Option)
Size L120XW12xH35.5 mm
Weight 39g
SMA plug with 5' lead For use with the EUB9603H and other devices with a SMA connector.
Doubles the range of the alfa AWUS036NHRv2/ EUB9603H / EUB-362 EXT
not for use with mmcx cards like the 2511cd plus ext2 or Ubiquity SRC
Also works with AWUS036NHRv2, ENS202EXT, EOC-3610S, EOC-8610S, EOC-3220, ESR-9710, EUB-9701 EXT2, EPI-3601S and ESR-1220
This antenna is matched for best performance with the EnGenius equipment and can handle the high power output.
Features:
High performance
7 dBi gain
Compact size, 10.2 " High
Magnetic base removeable antenna
5 foot coax lead
Untitled Document
This antenna is matched for best performance with the Engenius equipment and provides 2x the range of a stock 3dBi antenna.
Use for applications that require up to 1.5 miles in all directions.
Inlcudes pole mounting hardware. It has a standard N female connector to fit any of our pigtails.
Applications: Boat, RV, Truck, WiFi Client, WiFi repeater
This antenna covers 360 degrees in the horizontal plane and 15 degrees in the Verticle. It will cover in all directions well including loacations above and below.
Good for boats or mobile applications where rocking or uneaven mounting can cause a higher gain antenna to go out of range.
optional wall mount
Frequency
2400-2500 MHz
Gain
8.5 dBi
Polarization
Vertical
Vertical Beam Width
25°
Horizontal Beam Width
360°
Impedance
50 Ohm
Max. Input Power
50 Watts
VSWR
< 1.5:1 avg.
Weight
1.1 lbs. (0.5 kg)
Length
20 in. (0.5 m)
Radome Material
White Fiberglass
Mounting
2.0" diameter mast max.
Wind Survival
>150 MPH
Operating Temperature
-45° C to +80° C
Connector
Integral N-Type Female
(Bulkhead type)
This is the longest range USB WiFi solution for boaters and campers with range up to 3 miles +.
This kit includes the 600mW USB adapter and all required cables and drivers for XP, Vista and 7 now also supports MAC. Our latest adapter takes up only one USB plug and support all WiFi networks 802.11b g and n at speeds up to 150Mbps.
Includes a 8.5dBi marine antenna with pole and wall mounting hardware, a 2 foot antenna cable.
you will get the best signal with the short 2 foot antenna cable but the longer cable gives you more mounting options
The long range USB adapter includes a screen clip and 5 foot USB cable.
This is a plug and play system install the driver and plug in the adapter and you will be on the Internet.
includes:
high power / long range USB adapter
8.5dBi antenna with mounting hardware
2 Foot antenna cable
5 foot dual USB cable
5dBi scew on antenna
screen mounting clip and suction cup for window mounting
shown with 2 foot antenna cable
mmcx to n male 2 feet Use this for our 2511CD-plus-ext2 card to connect to any of our external entennas. The coax and connectors used in these cables are high quality low loss
Also works with other cards with mmcx connnectors like UBIQUITI SRC, Z-Com XI-325 and SMC2532W-B
We do not stock longer pigtails because they should be as short as possible to reduce line loss.
RP-SMA male to N-Male 2 ft
This is the correct pigtail for the ECB350, eoc2611p, enh200 ext, eoc1650, eoc-5610, EUB9603H, EUB-362 EXT, EOC-3610S, EOC-8610S, EOC-3220, ESR-9710, EUB-9701 EXT2, EPI-3601S and ESR-1220
This pigtail is matched for best performance with the Engenius equipment. The coax and connectors used in these cables are high quality low loss
We do not stock longer pigtails because they should be as short as possible to reduce line loss.
rp-tnc to n male 4 feetUse this to connect the ecb3500, ecb-3610S, ecb-8610S, ecb-3220 and 2611cb3 to any of our external antennas.
This pigtail is matched for best performance with the Engenius equipment. The coax and connectors used in these cables are high quality low loss
We do not stock longer pigtails because they should be as short as possible to reduce line loss.
U.FL pigtail for mini PCI cards including EMP-8602, EMP-9701,SR5 and
SR2
Connector 1: U.FL
Connector 2: TNC Female Bulkhead
Cable type: 1.13mm Low Loss
Overall length: 10 inches
The outside of the RP-TNC connector is threaded with a male center pin