Auto-detect and centralized management, up to 50 CAPs
License-free management reduces the OPEX of enterprise network
Unified configuration of wireless networks, support mapping of SSID and VLAN
Dual-link back up for management safety
Untitled Document
This antenna is matched for best performance with the Engenius equipment and provides 2x the range of a stock 3dBi antenna.
Use for applications that require up to 1.5 miles in all directions.
Inlcudes pole mounting hardware. It has a standard N female connector to fit any of our pigtails.
Applications: Boat, RV, Truck, WiFi Client, WiFi repeater
This antenna covers 360 degrees in the horizontal plane and 15 degrees in the Verticle. It will cover in all directions well including loacations above and below.
Good for boats or mobile applications where rocking or uneaven mounting can cause a higher gain antenna to go out of range.
optional wall mount
Frequency
2400-2500 MHz
Gain
8.5 dBi
Polarization
Vertical
Vertical Beam Width
25°
Horizontal Beam Width
360°
Impedance
50 Ohm
Max. Input Power
50 Watts
VSWR
< 1.5:1 avg.
Weight
1.1 lbs. (0.5 kg)
Length
20 in. (0.5 m)
Radome Material
White Fiberglass
Mounting
2.0" diameter mast max.
Wind Survival
>150 MPH
Operating Temperature
-45° C to +80° C
Connector
Integral N-Type Female
(Bulkhead type)
AH-ATOM-FCC
Atom AP30 revolutionizes the Access Point form factor and deployment model by leveraging power sockets for powering the access point and a choice of ethernet or mesh technology for data backhaul.
The simple and intuitive design coupled with pain-free installation and zero touch setup makes Atom AP30 the ideal choice for a variety of use cases. Atom AP30 is powered by IEEE 802.11ac technology for client connectivity and backhaul with the added benet of an Ethernet port, which can be used to provide IP connectivity to neighboring wired devices and BLE for IoT applications. Atom AP30 can be deployed as a complete access solution or in combiniation with Aerohive’s extensive Wi-Fi portfolio for high density networks.
Plug Wi-Fi Dead Zones – Atom AP30 instantly extends coverage and capacity to challenging areas or connectivity blind spots. Atom can be temporarily installed if additional coverage is required for only a period of time, and re-organized if building layouts change without costly re-cabling or installation.
Reduce Network Cabling and Installation Costs – For organizations with a wealth of spare power and data outlets, Atom AP30 makes it easy to re-use existing infrastructure for lower cost and simplified rollouts.
Bridge IoT Devices – Acting as a hub, Atom AP30 makes it simple and secure to connect Wi-Fi and Ethernet-based IoT devices and sensors.
Extend Corporate Connectivity for Teleworkers – Equipped with a L2 VPN client, Atom AP30 can easily extend connectivity for remote workers on the go or at home.
Connect Temporary Locations or Kiosks – Temporary areas, events, or kiosks can gain network access with minimal effort.
5-Year Manufacturer Warranty
EnGenius Cloud Managed ECW230 Wi-Fi 6
(802.11ax) 4x4 Managed Indoor Wireless Access Point features 802.11ax
technology, such as OFDMA, MU-MIMO, and spatial reuse, to expand the
capabilities of Wi-Fi. The low-profile AP provides
high-density support & maximum speeds of 1,148
Mbps (2.4 GHz frequency) and 2,400 Mbps (5 GHz
frequency).
●
Dual concurrent 802.11ax architecture &
backward-compatible with 11ac/a/b/g/n client devices; 4x4 antenna
●
Supports up to 2,400 Mbps in 5-GHz frequency band
& 1,148 Mbps in 2.4-GHz frequency band
●
2.5 GbE realizes
greater throughput and supports 802.3at & 48V PoE input for flexible
installation over 100 meters (328 feet)
●
Uplink and downlink of
OFDMA improves transmission to APs and client devices.
●
Target wake time for
power-saving of client & IoT devices
●
Uplink & downlink of
MU-MIMO for optimal signal & reception reliability for up to 8 devices (4 for
the ECW230)
●
BSS coloring for
tagging packets with a “color” to differentiate between adjacent basic service
sets.
●
Spatial reuse
identifies color sets via BSS coloring & simultaneously transmits on the same
channel, reducing transmission waiting time and contention.
●
Compliance with
& 48V PoE input for flexible installation up-to 328 feet 48v 802.3at PoE compatible injector not included use one of these
●
Quick-Scan Device Register & Configuration and
Remote Monitoring & Troubleshooting
●
Cloud Manage unlimited
number of AP’s from Anywhere with the EnGenius Cloud App
●
Mesh Wireless Support Simplifies Setup, Optimizes
Signals & Self-Heals
●
Real-time system metrics, deep-dive analytics and
remote configurations
●
No Access Point Licensing or Subscription Fees
Advanced wireless security WPA 3 Personal (SAE),
WPA3/WPA2 Personal mixed and WP3/WP2 Enterprise
with Suite B Support.
ECP106 in Stock!
EnGenius
ECP106 offers a cloud-based power management solution for data centers,
businesses, and homes. It enables remote control via the EnGenius Cloud
platform, efficiently managing energy consumption and providing advanced surge
protection. This solution features the capability to power cycle multiple
managed devices, streamlining maintenance and troubleshooting efforts.
·
Built In Surge
Protection and Overcurrent Protection
·
14 individually
switchable outlets
·
Real-Time power
consumption information, alerts, and controls from anywhere with EnGenius Cloud
·
1.3-inch LCD display for in-site information and
controls
·
Network self-healing
when devices go offline
·
Local and cloud management with power consumption
reports, by PDU or by outlet
·
Flexible mounting
capabilities for 1U, 0U, wall or under-desk mounting
·
15A circuit breaker for
overload protection
·
Fireproof MOV for surge
protection
·
Surge Protection
certified with UL-1449
·
RESTFUL API and SNMP
v1, 2c, and v3 support
·
6 NEMA 5-15R Outlets
AH-AP-630-AX-FCC
• 4x4:4 802.11ax ready Access Point with integrated antennas
• Support for 802.11ax
• 2x 1G Ethernet ports
• Built in BLE for iBeacon and beacon management applications
• USB support for future IoT use cases
• Console port for CLI access
AH-AP-650-AX-FCC
• 4x4:4 802.11ax ready Access Point with integrated antennas
• Support for 802.3bz up to 2.5Gbps.
• Support for 802.11ax
• 2x Ethernet ports (supporting 2.5G and 1G)
• Extended temperature support (-20ºC to +55ºC) on AP650X
• Built in BLE for ibeacon and beacon management applications
• USB support for future IOT use cases
• Console port for CLI access
AH-AP-650X-AX-FCC
• 4x4:4 802.11ax ready Access Point with external antenna connectors NOTE antennas are not included order AH-ACC-ANT-AX-KT
• Support for 802.3bz up to 2.5Gbps.
• Support for 802.11ax
• 2x Ethernet ports (supporting 2.5G and 1G)
• Extended temperature support (-20ºC to +55ºC) on AP650X
• Built in BLE for ibeacon and beacon management applications
• USB support for future IOT use cases
• Console port for CLI access
EnGenius Cloud Managed ECW220
5-Year Manufacturer Warranty
Wi-Fi 6 (802.11ax) 2x2
Indoor Wireless Access Point features 802.11ax technology, such as OFDMA,
MU-MIMO, and spatial reuse, to expand the capabilities of Wi-Fi.
The low-profile AP consumes less power & provides
maximum speeds of 574 Mbps (2.4 GHz frequency) and 1,200 Mbps (5 GHz frequency).
●
Dual concurrent
802.11ax architecture & backward-compatible with 11ac/a/b/g/n client devices;
2x2 antenna
●
Supports up to 1,200
Mbps in 5-GHz frequency band & 574 Mbps in 2.4-GHz frequency band
●
Uplink and downlink of OFDMA improves transmission to APs and client devices.
●
Target wake time for power-saving of client & IoT devices
●
Uplink & downlink of MU-MIMO for optimal signal & reception reliability for up
to 2 devices
●
BSS coloring for
tagging packets with a “color” to differentiate between adjacent basic service
sets.
●
Spatial reuse
identifies color sets via BSS coloring & simultaneously transmits on the same
channel, reducing transmission waiting time and contention.
●
GigE PoE-Compliance
with PoE input for flexible installation up-to 328 feet 48v 802.3af PoE compatible injector not included use one of these
●
Quick-Scan Device Register & Configuration and
Remote Monitoring & Troubleshooting
●
Cloud Manage unlimited
number of AP’s from Anywhere with the EnGenius Cloud App
●
Mesh Wireless Support Simplifies Setup, Optimizes
Signals & Self-Heals
●
Real-time system metrics, deep-dive analytics and
remote configurations
●
No Access Point Licensing or Subscription Fees
Advanced wireless security WPA 3 Personal (SAE),
WPA3/WPA2 Personal mixed and WP3/WP2 Enterprise
with Suite B Support.
5-Year Manufacturer Warranty
EnGenius ECW220S Cloud-Managed Wi-Fi 6 security access
point (AP) is ideal for information-sensitive financial, medical, and
distributed networks and comes equipped with EnGenius AirGuard™, an intelligent
wireless security system that identifies and eliminates intrusions and threats
24/7 while providing client devices with maximum performance.
·
Wi-Fi 6 technology for high-performance Wi-Fi in high-density, multi-device
environments
·
2x2
antennas to support up to 1,200 Mbps in 5-GHz & 574 Mbps in 2.4-GHz
·
1
GbE throughput and 802.3at support for flexible installation over 100 meters
(328 feet)
·
Wireless intrusion detection system (WIDS) for threat detection
·
Wireless intrusion protection system (WIPS) for attack remediation
·
Zero-wait DFS to avoid client disruption when radar is detected on DFS channels
·
Dedicated scanning radios for 24/7 wireless security monitoring
·
RF
spectrum analysis for identifying clean channels and ensuring all SSIDs are
legitimate
Bluetooth 5 low energy for
BLE device detection and location-based extended advertising
Sidekick II in stock only TAX in CT
Provides the most accurate and standardized Wi-Fi surveys of any device on the market today. 2 enterprise-grade 802.11ac Wi-Fi radios, top-of-the-line spectrum analyzer with 2.4 and 6 GHz Wi-Fi combined with automated interference source detection
****hardware only requires ekahau site survey pro
H550 in stock!
High-End Wall-Mounted Wi-Fi 6 2x2:2 Indoor Access Point with 1.8 Gbps max rate,
Switch and Embedded IoT
The RUCKUS H550 wall-mounted access point, IoT gateway and Ethernet switch makes
it easy to support the most demanding in-room connectivity requirements. It
starts with RUCKUS patented Wi-Fi optimization intelligence to deliver the
industry's highest-performing wireless connectivity. Combine that with
four-ports of Gigabit Ethernet to connect multiple in-room wired devices,
without extra cabling and add supports for Zigbee® and Bluetooth® Low Energy, as
well as other protocols via optional USB modules. Put it all in a sleek
low-profile design that can be discretely installed over a standard electrical
outlet.
R350 in stock!
RUCKUS R350 dual-band 802.11abgn/ac/ax Wireless Access Points, 2x2:2 streams (2.4GHz/5GHz) OFDMA, MU-MIMO, BeamFlex+, 802.3af PoE support. Does not include power adapter or PoE injector. Includes Limited Lifetime Warranty.
R350 unleashed in stock!
RUCKUS R350 unleashed dual-band 802.11abgn/ac/ax Wireless Access Points, 2x2:2 streams (2.4GHz/5GHz) OFDMA, MU-MIMO, BeamFlex+, 802.3af PoE support. Does not include power adapter or PoE injector. Includes Limited Lifetime Warranty.
R550 in stock!
FREE shipping on R750 only sales tax in CT
This is the new ruckus mid range 2x2 Wi-Fi 6 AP
Wi-Fi capacity requirements in classrooms, office spaces, and medium-size
venues are rising due to the increase in the number of Wi-Fi connected
devices. An increase in bandwidth requirements for applications and an
ever-growing assortment of IoT devices puts further strain on already
stretched Wi-Fi networks.
The R550 access point (AP) with the latest Wi-Fi 6 (802.11 ax) technology
delivers the ideal combination of increased capacity, improved coverage and
affordability in dense environments. The R550 is our mid- range dual-band,
dual-concurrent AP that supports four spatial streams (2x2:2 in
2.4GHz/5GHz). The R550 supports peak data rates of up to 1774 Mbps and
efficiently manages up to 512 clients connections.
Stunning Wi-Fi
Performance - Mitigate interference and extend coverage with patented
BeamFlex+™ adaptive antenna technology utilizing several directional antenna
patterns.
Serve more devices
- Connect more devices simultaneously with four MU-MIMO spatial streams and
concurrent dual-band 2.4/5GHz radios while enhancing device performance.
Converged access
point - Allow customers to eliminate siloed networks and unify Wi-Fi and IoT
technologies into one single network by using built-in BLE and Zigbee, and
also expand to any future wireless technologies.
Automate Optimal
Throughput - ChannelFly dynamic channel technology uses machine learning to
automatically find the least congested channels. You always get the highest
throughput the band can support.
Better Mesh
Networking - Reduce expensive cabling, and complex mesh configurations by
checking a box with SmartMesh wireless meshing technology to dynamically
create self-forming, self-healing mesh networks.
More than Wi-Fi -
Support services beyond Wi-Fi with RUCKUS IoT Suite, Cloudpath security and
onboarding software, SPoT Wi-Fi locationing engine, and RUCKUS analytics.
Requires 802.3at
PoE injector not included
use this one.
Wi-Fi capacity requirements in classrooms, office spaces, and medium-size
venues are rising due to the increase in the number of Wi-Fi connected
devices. An increase in bandwidth requirements for applications and an
ever-growing assortment of IoT devices puts further strain on already
stretched Wi-Fi networks.
The R550 access point (AP) with the latest Wi-Fi 6 (802.11 ax) technology
delivers the ideal combination of increased capacity, improved coverage and
affordability in dense environments. The R550 is our mid- range dual-band,
dual-concurrent AP that supports four spatial streams (2x2:2 in
2.4GHz/5GHz). The R550 supports peak data rates of up to 1774 Mbps and
efficiently manages up to 512 clients connections.
Stunning Wi-Fi
Performance - Mitigate interference and extend coverage with patented
BeamFlex+™ adaptive antenna technology utilizing several directional antenna
patterns.
Serve more devices
- Connect more devices simultaneously with four MU-MIMO spatial streams and
concurrent dual-band 2.4/5GHz radios while enhancing device performance.
Converged access
point - Allow customers to eliminate siloed networks and unify Wi-Fi and IoT
technologies into one single network by using built-in BLE and Zigbee, and
also expand to any future wireless technologies.
Automate Optimal
Throughput - ChannelFly dynamic channel technology uses machine learning to
automatically find the least congested channels. You always get the highest
throughput the band can support.
Better Mesh
Networking - Reduce expensive cabling, and complex mesh configurations by
checking a box with SmartMesh wireless meshing technology to dynamically
create self-forming, self-healing mesh networks.
More than Wi-Fi -
Support services beyond Wi-Fi with RUCKUS IoT Suite, Cloudpath security and
onboarding software, SPoT Wi-Fi locationing engine, and RUCKUS analytics.
Requires 802.3at
PoE injector not included
use this one.