Extend your range greatly in one direction with this screw on directional
antenna.
works with EUB9603H, ECB350, ECB300, (ECB600 2.4Ghz connectors), ENS202EXT to push the
signal in the direction you need it most.
Frequency 2400〜2500MHz
Gain (dBi) 6.5 dBi
Type PANEL
Polarization Vertical
Impedance 50Ω
Beam width deg. Horz.90° Vert.90°
VSWR ≦1.6
Cable Connector SMA MALE RP (Option)
Size L120XW12xH35.5 mm
Weight 39g
The EnGenius EPA5060HBT 802.3bt PoE Injector delivers
60-watts of power and 2.5Gb data communication to compatible network devices up
to 328 feet (100m) over CAT5e cable. Compact design with IEEE802.3bt compliance
offers easy installation while providing built-in power protection to preserve
valuable equipment.
IEEE 802.3bt Type 3 compliant
IEEE 802.3af/at backward compatible
Backward compatible for legacy PoE -Supports 10/100/1000 Mbps Up to 2.5Gb
applications
Output power up to 60W over four pairs with auto-detection on power
requirement
Leverage energy efficient PoE up to 60W with full power capabilities
Single-port PoE Midspan Injector flexible design allows for either desktop
or surface-mount use
Fan-less design ideal for silent operation
Simple plug-and-play installation
SMA plug with 5' lead For use with the EUB9603H and other devices with a SMA connector.
Doubles the range of the alfa AWUS036NHRv2/ EUB9603H / EUB-362 EXT
not for use with mmcx cards like the 2511cd plus ext2 or Ubiquity SRC
Also works with AWUS036NHRv2, ENS202EXT, EOC-3610S, EOC-8610S, EOC-3220, ESR-9710, EUB-9701 EXT2, EPI-3601S and ESR-1220
This antenna is matched for best performance with the EnGenius equipment and can handle the high power output.
Features:
High performance
7 dBi gain
Compact size, 10.2 " High
Magnetic base removeable antenna
5 foot coax lead
Untitled Document
This antenna is matched for best performance with the Engenius equipment and provides 2x the range of a stock 3dBi antenna.
Use for applications that require up to 1.5 miles in all directions.
Inlcudes pole mounting hardware. It has a standard N female connector to fit any of our pigtails.
Applications: Boat, RV, Truck, WiFi Client, WiFi repeater
This antenna covers 360 degrees in the horizontal plane and 15 degrees in the Verticle. It will cover in all directions well including loacations above and below.
Good for boats or mobile applications where rocking or uneaven mounting can cause a higher gain antenna to go out of range.
optional wall mount
Frequency
2400-2500 MHz
Gain
8.5 dBi
Polarization
Vertical
Vertical Beam Width
25°
Horizontal Beam Width
360°
Impedance
50 Ohm
Max. Input Power
50 Watts
VSWR
< 1.5:1 avg.
Weight
1.1 lbs. (0.5 kg)
Length
20 in. (0.5 m)
Radome Material
White Fiberglass
Mounting
2.0" diameter mast max.
Wind Survival
>150 MPH
Operating Temperature
-45° C to +80° C
Connector
Integral N-Type Female
(Bulkhead type)
Report Builder Software Accessory
The Report Builder Accessory is a license that unlocks the Report Builder features in Chanalyzer to provide an easy way to create a record of what you saw during a recording, and what you did to correct those issues. Add any or all of the graphs & tables that Chanalyzer displays with just one click, or create custom text and image blocks to your specifications. When you’ve finished your report, export it to PDF format for emailing or printing.
AP1130, outdoor rated, 2 radio 2x2 802.11a/b/g/n/ac, 1 10/100/1000, FCC regulatory domain, without power supply. Includes HiveManager Connect & HiveCare Community.
does not include antennas
AH-AP-1130-AC-FCC
AH-AP-630-AX-FCC
• 4x4:4 802.11ax ready Access Point with integrated antennas
• Support for 802.11ax
• 2x 1G Ethernet ports
• Built in BLE for iBeacon and beacon management applications
• USB support for future IoT use cases
• Console port for CLI access
AH-AP-650-AX-FCC
• 4x4:4 802.11ax ready Access Point with integrated antennas
• Support for 802.3bz up to 2.5Gbps.
• Support for 802.11ax
• 2x Ethernet ports (supporting 2.5G and 1G)
• Extended temperature support (-20ºC to +55ºC) on AP650X
• Built in BLE for ibeacon and beacon management applications
• USB support for future IOT use cases
• Console port for CLI access
AH-AP-650X-AX-FCC
• 4x4:4 802.11ax ready Access Point with external antenna connectors NOTE antennas are not included order AH-ACC-ANT-AX-KT
• Support for 802.3bz up to 2.5Gbps.
• Support for 802.11ax
• 2x Ethernet ports (supporting 2.5G and 1G)
• Extended temperature support (-20ºC to +55ºC) on AP650X
• Built in BLE for ibeacon and beacon management applications
• USB support for future IOT use cases
• Console port for CLI access
AH-ATOM-FCC
Atom AP30 revolutionizes the Access Point form factor and deployment model by leveraging power sockets for powering the access point and a choice of ethernet or mesh technology for data backhaul.
The simple and intuitive design coupled with pain-free installation and zero touch setup makes Atom AP30 the ideal choice for a variety of use cases. Atom AP30 is powered by IEEE 802.11ac technology for client connectivity and backhaul with the added benet of an Ethernet port, which can be used to provide IP connectivity to neighboring wired devices and BLE for IoT applications. Atom AP30 can be deployed as a complete access solution or in combiniation with Aerohive’s extensive Wi-Fi portfolio for high density networks.
Plug Wi-Fi Dead Zones – Atom AP30 instantly extends coverage and capacity to challenging areas or connectivity blind spots. Atom can be temporarily installed if additional coverage is required for only a period of time, and re-organized if building layouts change without costly re-cabling or installation.
Reduce Network Cabling and Installation Costs – For organizations with a wealth of spare power and data outlets, Atom AP30 makes it easy to re-use existing infrastructure for lower cost and simplified rollouts.
Bridge IoT Devices – Acting as a hub, Atom AP30 makes it simple and secure to connect Wi-Fi and Ethernet-based IoT devices and sensors.
Extend Corporate Connectivity for Teleworkers – Equipped with a L2 VPN client, Atom AP30 can easily extend connectivity for remote workers on the go or at home.
Connect Temporary Locations or Kiosks – Temporary areas, events, or kiosks can gain network access with minimal effort.
Long range USB adapter with SMA connector detachable 5dBi omni directional antenna with SMA connector
CLICK HERE FOR 7dBI MAG MOUNT ANTENNA
7dBi extended range antenna
Click here for SMA pigtail
Click here for external antennas
Alfa AWUS036NHR v2 is a long range 2000mW max RF output power Wi-Fi USB adapter from Alfa Network, Inc., This is version 2 It features a redesigned interior that enhances quality and functionality. includes the adapter, a 5 dBi antenna with SMA connector, driver CD, and a USB cable. It also includes one mount holder with detachable suction cup and clip. The cup is great if you want to fasten it to a window, while the clip is perfect for mobile users as it allows the device to be easily and safely clipped to the bezel on many laptop LCD displays.
It will work with any computer that has an available USB port and Windows XP, Vista, Windows 7, or Windows 8. (windows 10 will download a driver automatically but you need to be connected to the Internet via internal Wi-Fi first) mac OS 10.4x or greater. It at also ships with a Linux driver, but this driver comes with no warranty or support. Linux is a user supported operating system and at this time we do no have walk-throughs or guides for specific Linux installs. We recommend searching online using the chipset name RTL8188RU to find out if this is compatible with your Linux distro. This works on Microsoft Surface Pro tablets running Windows 8 (requires driver download) but does NOT work with Windows Surface RT tablets or other tablets/laptops running Microsoft Surface RT, which looks like Windows 8 but is actually a locked down version of Windows that does not support 3rd party drivers.
EnGenius Cloud Managed ESG610 2.2 GHz Quad-Core SD-WAN Gateway with Dual-WAN
2.5 GbE, Dual-LAN 2.5 GbE, auto-VPN site-to-site and client, WAN balancing and
failover, and stateful firewall delivers more simplicity and security to
businesses by providing the IT team with effortless setup, enterprise-level
security, and an end-to-end network solution.
· Simple, unified cloud
management for enterprise business · Intuitive and centralized device
visibility from anywhere · Quad core 2.2 GHz processor for greater speed and
power · Auto-VPN with healing and NAT traversal for multi-peer SD-WAN setup
· Dual 2.5GbE WAN and Dual 2.5GbE LAN for maximum performance · 2.5 GbE PoE+
to power up a Wi-Fi 6E AP, IP camera or IP phone · Multi-Gig and cellular WAN
optimization with built-in load balancing and failover · Enhance security
with a high throughput firewall · Quick VPN and VLAN setup for easy
configurations · WAN monitoring, VPN status and topology view for real-time
visibility · Passthrough mode for easy integration into existing networks
· TPM chipset to enhance the security level of the gateway · Touchless
system maintenance and automatic updates · No licensing or subscription fees
needed