2400 MHz - 2500 MHz, 12dBi Omnidirectional Fiberglass Antenna, N Female Connector, White includes mounting hardware
6.5dBi 2.4Ghz directional antenna SMA male RP
Extend your range greatly in one direction with this screw on directional
antenna.
works with EUB9603H, ECB350, ECB300, (ECB600 2.4Ghz connectors), ENS202EXT to push the
signal in the direction you need it most.
Frequency 2400〜2500MHz
Gain (dBi) 6.5 dBi
Type PANEL
Polarization Vertical
Impedance 50Ω
Beam width deg. Horz.90° Vert.90°
VSWR ≦1.6
Cable Connector SMA MALE RP (Option)
Size L120XW12xH35.5 mm
Weight 39g
SMA plug with 5' lead For use with the EUB9603H and other devices with a SMA connector. Doubles the range of the alfa AWUS036NHRv2/ EUB9603H / EUB-362 EXT not for use with mmcx cards like the 2511cd plus ext2 or Ubiquity SRC Also works with AWUS036NHRv2, ENS202EXT, EOC-3610S, EOC-8610S, EOC-3220, ESR-9710, EUB-9701 EXT2, EPI-3601S and ESR-1220 This antenna is matched for best performance with the EnGenius equipment and can handle the high power output. Features: High performance 7 dBi gain Compact size, 10.2 " High Magnetic base removeable antenna 5 foot coax lead
Untitled Document This antenna is matched for best performance with the Engenius equipment and provides 2x the range of a stock 3dBi antenna. Use for applications that require up to 1.5 miles in all directions. Inlcudes pole mounting hardware. It has a standard N female connector to fit any of our pigtails. Applications: Boat, RV, Truck, WiFi Client, WiFi repeater This antenna covers 360 degrees in the horizontal plane and 15 degrees in the Verticle. It will cover in all directions well including loacations above and below. Good for boats or mobile applications where rocking or uneaven mounting can cause a higher gain antenna to go out of range. optional wall mount Frequency 2400-2500 MHz Gain 8.5 dBi Polarization Vertical Vertical Beam Width 25° Horizontal Beam Width 360° Impedance 50 Ohm Max. Input Power 50 Watts VSWR < 1.5:1 avg. Weight 1.1 lbs. (0.5 kg) Length 20 in. (0.5 m) Radome Material White Fiberglass Mounting 2.0" diameter mast max. Wind Survival >150 MPH Operating Temperature -45° C to +80° C Connector Integral N-Type Female (Bulkhead type)
H550 in stock! High-End Wall-Mounted Wi-Fi 6 2x2:2 Indoor Access Point with 1.8 Gbps max rate, Switch and Embedded IoT The RUCKUS H550 wall-mounted access point, IoT gateway and Ethernet switch makes it easy to support the most demanding in-room connectivity requirements. It starts with RUCKUS patented Wi-Fi optimization intelligence to deliver the industry's highest-performing wireless connectivity. Combine that with four-ports of Gigabit Ethernet to connect multiple in-room wired devices, without extra cabling and add supports for Zigbee® and Bluetooth® Low Energy, as well as other protocols via optional USB modules. Put it all in a sleek low-profile design that can be discretely installed over a standard electrical outlet.
R550 in stock!
FREE shipping on R750 only sales tax in CT
This is the new ruckus mid range 2x2 Wi-Fi 6 AP
Wi-Fi capacity requirements in classrooms, office spaces, and medium-size
venues are rising due to the increase in the number of Wi-Fi connected
devices. An increase in bandwidth requirements for applications and an
ever-growing assortment of IoT devices puts further strain on already
stretched Wi-Fi networks.
The R550 access point (AP) with the latest Wi-Fi 6 (802.11 ax) technology
delivers the ideal combination of increased capacity, improved coverage and
affordability in dense environments. The R550 is our mid- range dual-band,
dual-concurrent AP that supports four spatial streams (2x2:2 in
2.4GHz/5GHz). The R550 supports peak data rates of up to 1774 Mbps and
efficiently manages up to 512 clients connections.
Stunning Wi-Fi
Performance - Mitigate interference and extend coverage with patented
BeamFlex+™ adaptive antenna technology utilizing several directional antenna
patterns.
Serve more devices
- Connect more devices simultaneously with four MU-MIMO spatial streams and
concurrent dual-band 2.4/5GHz radios while enhancing device performance.
Converged access
point - Allow customers to eliminate siloed networks and unify Wi-Fi and IoT
technologies into one single network by using built-in BLE and Zigbee, and
also expand to any future wireless technologies.
Automate Optimal
Throughput - ChannelFly dynamic channel technology uses machine learning to
automatically find the least congested channels. You always get the highest
throughput the band can support.
Better Mesh
Networking - Reduce expensive cabling, and complex mesh configurations by
checking a box with SmartMesh wireless meshing technology to dynamically
create self-forming, self-healing mesh networks.
More than Wi-Fi -
Support services beyond Wi-Fi with RUCKUS IoT Suite, Cloudpath security and
onboarding software, SPoT Wi-Fi locationing engine, and RUCKUS analytics.
Requires 802.3at
PoE injector not included
use this one.
R560 2x2 Wi-Fi 6E AP in stock! The RUCKUS R560 is Ruckus Networks mid-range tri-band concurrent Wi-Fi 6E indoor AP that supports 8 spatial streams (2x2:2 concurrent in 2.4GHz, 5GHz, and 6GHz). The RUCKUS R560, with OFDMA and MU-MIMO capabilities, efficiently manages up to 1536 client connections with increased capacity, improved coverage and performance in ultra-high dense environments. It is designed to address the needs of high throughput indoor locations such as hotel/MDU hallways, student housing, and classrooms. As with all RUCKUS® APs, the R560 delivers reliable, secure, and high-performance connectivity. R560 is a fully certifiable Wi-Fi 6E access point. Tri-band Concurrent Mode: 2.4GHz (2x2:2) + 5GHz (2x2:2) + 6GHz (2x2:2) Supports up to 1536 clients per AP WPA3 Ability to onboard Bluetooth® Low Energy (BLE) and Zigbee® technology Note Ruckus One Cloud License is required for 6Ghz operation of Wi-Fi 6E or Wi-Fi 7 AP's
R650 in stock! The R650 access point (AP) with the latest Wi-Fi 6 (802.11 ax) technology delivers increased capacity, improved coverage and performance in dense environments. The R650 is our mid-range dual-band, dual-concurrent AP that supports six spatial streams (4x4:4 in 5GHz, 2x2:2 in 2.4GHz). The R650 supports peak data rates of up to 2974 Mbps and efficiently manages up to 512 clients connections. Furthermore, 2.5GbE Ethernet ensures the backhaul will not be a bottleneck for full use of available Wi-Fi capacity.
R750 in stock! The Ruckus R750 is our high-end dual-band, dual-concurrent Wi-Fi 6 AP that supports 8 spatial streams (4x4:4 in 5GHz, 4x4:4 in 2.4GHz). The R750, with OFDMA and MU-MIMO capabilities, eɝcientl\ manages up to 1024 client connections with increased capacity, improved coverage and performance in ultra-high dense environments. manages up to 1024 client connections The R750 has built-in IoT radios with onboard BLE and Zigbee 2.5GbE port to connect to multigigabit switches and secondary 1GbE port. Supports 802.3at PoE+ and 802.3af PoE PDF data sheet here
R760 in stock! Manage with the R1 Ruckus Cloud, smartzone controller or stand alone The TriBand 2.4/5 and 6Ghz Wi-Fi 6E R760 is a high-end indoor access point (AP) made for ultra-dense indoor locations such as convention centers, lecture halls and stadiums R1 cloud license required for full functionality AC power adapter 60W 802.3af/at/bt 2.5GbE Power over Ethernet Injector 10-Gig 8-Port PoE++ Switch Note Ruckus One Cloud License is required for 6Ghz operation of Wi-Fi 6E or Wi-Fi 7 AP's
Ruckus R770 Wi-Fi 7 tri-band concurrent wireless Access Point with 2x2
(2.4GHz) + 4x4 (5GHz) + 2x2 (6GHz) RF configurations. Wi-Fi 7 support in all
three frequency bands. 6GHz band supports LPI mode and SP mode with AFC. Fully
backward compatible with Wi-Fi 6E. Can also be configured to 2x2 (2.4GHz) + 4x4
(5GHz) dual-band RF configurations through software, with Wi-Fi 7 support in
both frequency bands.
BeamFlex+®, one 10-Gigabit Ethernet backhaul, one 1-Gigabit auxiliary port,
802.3bt PoE-in and 48V DC, onboard Bluetooth® Low Energy (BLE) and Zigbee®
technology selectable IoT radio with “Matter” and “Thread” capable, USB 2.0, TPM
2.0, Secure Boot, and DPSK3.
Includes adjustable acoustic drop ceiling bracket. Does not include power Injector
R1 cloud license required for full functionality
Click here for 802.3bt 60W PoE++ injector
AC power adapter
Click here for ECS5512FP PoE++ 802.3bt 10Gb switch
T350c in stock!
The RUCKUS T350d outdoor Wi-Fi 6 AP is designed for for high-density outdoor
public venues such as airports, convention centers, plazas, malls, smart cities,
and other dense urban environments.
T350d is good for harsh
environments down to -20 degrees
802.11ax 2x2 2.4 / 5Ghz
1 x 1GbE | RJ-45 PoE In - 802.3at
mange with zonedirector 1200, smartzone or ruckus cloud
T350d in stock!
The RUCKUS T350d outdoor Wi-Fi 6 AP is designed for for high-density outdoor
public venues such as airports, convention centers, plazas, malls, smart cities,
and other dense urban environments.
T350d is good for harsh
environments down to -40 degrees
802.11ax 2x2 2.4 / 5Ghz
1 x 1GbE | RJ-45 PoE In - 802.3at
mange with zonedirector 1200, smartzone or ruckus cloud
T350SE in stock!
The RUCKUS T350SE outdoor Wi-Fi 6 AP with 120 degree sector is designed for for high-density outdoor
public venues such as airports, convention centers, plazas, malls, smart cities,
and other dense urban environments.
T350SE is good for harsh
environments down to -40 degrees
802.11ax 2x2 2.4 / 5Ghz
1 x 1GbE | RJ-45 PoE In - 802.3at
mange with zonedirector 1200, smartzone or ruckus cloud
Ruckus T750 in stock! Port: 1x 2.5G,1x 10/100/1000 Ethernet Port Omnidirectional Beamflex + Coverage IP-67 Outdoor Enclosure 2.4GHz and 5GHz Concurrent Dual Band 802.3at/bt PoE input or 100-240AC direct wire injector not included The Ruckus T750 Access Point (AP), based on the Wi-Fi 6 standard, brings in multi-gigabit Wi-Fi to support the ever-raising expectation for high quality of service from the users. It is IP-67 rated to withstand the rigors of outdoor deployments. This high-end, dual-band, dual-concurrent Wi-Fi 6 AP supports eight spatial streams. With OFDMA and MU-MIMO capabilities, it efficiently manages up to 1024 client connections with increased capacity, improved coverage and performance in ultra-high dense environments. The T750 addresses the increasing client demands in public venues such as airports, convention centers, plazas, malls, and other dense urban environments. It is the perfect choice for data-intensive streaming multimedia applications like 4K video transmissions, while supporting latency sensitive voice and data applications with stringent quality-of-service requirements. spec sheet
R350 unleashed in stock! RUCKUS R350 unleashed dual-band 802.11abgn/ac/ax Wireless Access Points, 2x2:2 streams (2.4GHz/5GHz) OFDMA, MU-MIMO, BeamFlex+, 802.3af PoE support. Does not include power adapter or PoE injector. Includes Limited Lifetime Warranty.
H350 Unleashed in stock! RUCKUS Unleashed H350 Wi-Fi 6 dual-band concurrent 2.4 GHz & 5 GHz, Wired/Wireless Wall Switch, BeamFlex+, 1 10/100/1000 & 2 10/100/1000 Ethernet Access Ports, POE in. Does not include DC power supp
R550 unleashed in stock!
This is the new ruckus mid range 2x2 Wi-Fi 6 AP
Wi-Fi capacity requirements in classrooms, office spaces, and medium-size
venues are rising due to the increase in the number of Wi-Fi connected
devices. An increase in bandwidth requirements for applications and an
ever-growing assortment of IoT devices puts further strain on already
stretched Wi-Fi networks.
The R550 access point (AP) with the latest Wi-Fi 6 (802.11 ax) technology
delivers the ideal combination of increased capacity, improved coverage and
affordability in dense environments. The R550 is our mid- range dual-band,
dual-concurrent AP that supports four spatial streams (2x2:2 in
2.4GHz/5GHz). The R550 supports peak data rates of up to 1774 Mbps and
efficiently manages up to 512 clients connections.
Stunning Wi-Fi
Performance - Mitigate interference and extend coverage with patented
BeamFlex+™ adaptive antenna technology utilizing several directional antenna
patterns.
Serve more devices
- Connect more devices simultaneously with four MU-MIMO spatial streams and
concurrent dual-band 2.4/5GHz radios while enhancing device performance.
Converged access
point - Allow customers to eliminate siloed networks and unify Wi-Fi and IoT
technologies into one single network by using built-in BLE and Zigbee, and
also expand to any future wireless technologies.
Automate Optimal
Throughput - ChannelFly dynamic channel technology uses machine learning to
automatically find the least congested channels. You always get the highest
throughput the band can support.
Better Mesh
Networking - Reduce expensive cabling, and complex mesh configurations by
checking a box with SmartMesh wireless meshing technology to dynamically
create self-forming, self-healing mesh networks.
More than Wi-Fi -
Support services beyond Wi-Fi with RUCKUS IoT Suite, Cloudpath security and
onboarding software, SPoT Wi-Fi locationing engine, and RUCKUS analytics.
Requires 802.3at
PoE injector not included
use this one.
The R650 access point (AP) with the latest Wi-Fi 6 (802.11 ax) technology delivers increased capacity, improved coverage and performance in dense environments. The R650 is our mid-range dual-band, dual-concurrent AP that supports six spatial streams (4x4:4 in 5GHz, 2x2:2 in 2.4GHz). The R650 supports peak data rates of up to 2974 Mbps and efficiently manages up to 512 clients connections. Furthermore, 2.5GbE Ethernet ensures the backhaul will not be a bottleneck for full use of available Wi-Fi capacity.
R750 unleashed in stock! Ruckus R750 Unleashed dual-band 802.11abgn/ac/ax (WiFi6) Wireless Access Point with Multi-Gigabit Ethernet backhaul and onboard BLE/ZIgbee,, 4x4:4 streams (5GHz) 4x4:4 streams (2.4GHz), OFDMA, MU-MIMO, BeamFlex+, dual ports, 802.3at PoE support. 2.5GbE port to connect to multigigabit switches and secondary 1GbE port. Supports 802.3at PoE+ and 802.3af PoE PDF data sheet here